Flashing Sock Rom On Nitro A310/A311

Hi Guys !!!
I recently Soft Bricked My A311 and it was totally DEAD !!!!!! BUT AFTER TWO DAYS HARD WORK FINALLY GOT IT WORKING TOTALLY FINE FROM DEAD STATE !!!

Part0: Basic Prior Information Before Flashing 

Part 1: Device Flashable Or Not! 

Part 2: Disabling Driver Signature Verification (For Win 8,8.1,10 Users Only) 

Part 3: Setting Up YGDP Tool For Flashing 

Part 4:-Installing Mtk65xx Preloader Drivers Manually 

Flashing TWRP Recovery With Stock Rom 

Part 5:-Flashing Through YGDP Tool Successfully

Factory Mode Error/Blue Box Error After Flashing 

When To Use My Method:-
1.Not able to flash any ROM (Every Rom Fails)
2.Error Message "Unable to mount /Data" OR "Unable to mount /cache" while flashing ROM
3. Internal Storage Error "No such directory exists "
4.Unable to Boot ur device in any way 



The Only Method I Suggest Is To Flash Stock Rom Using YGDP tool ........




BEFORE ACTUAL PROCESS FOLLOW THESE STEPS !!!!!

1. First, u need to Download Micromax A310/A311 Stock Rom and YGDP tool for this click on this link -http://androidxda.com/download-micro...ock-rom-models
2.U need a USB cable with Standard Configuration 
3. And Offcourse Ur Bricked Device 

Now The Actual Process>>>>>>>

1. Unzip The Download Stock ROM RAR into any directory of ur Computer(WINDOWS) and after unzipping u will get a file in.CPB Format
2.Install YGDP Tool on the System by clicking next next next but Don't Run
3. Now the most important and the most Tricky Part To Install The Device Drivers On The System...... If u already have drivers installed then u don't need to do this part........... To do this there r different methods for the different OS of windows but I prefer Windows 7.......... steps r given below:
a. Go to Start in Windows 
b. Right-click on the computer and open manage
c. Device Manager will open
d. Now remove the battery of ur bricked phone and connect it to the pc via the USB Cable 
e. Just on connecting USB cable hold volume down button and quickly press the power button around 10 times for the system to detect
f. Then the MT65XXX divers installation will get started on the system
h. When the installation gets finished unplug the USB cable 
i. Now again plug the USB cable without battery on device and u will see the added port in device manager for 3-5 Sec named as MTXXX preloader blah blah

4. Setting Up YGDP Tool:-
a. As Installed Earlier u will see a YDGP shortcut on the desktop
b.If it Stops working then don't panic Just go to application setting and set compatibility to windows 7
c.Now on opening, it will ask for password ........type 369 in password and press enter
d.then the application will start
e.Now u will see a Config Icon on the left top ........Open it
f.Now a window will open with devices on left and CPB select on right .......
h.Now on right side select 8297W_I01 for A310 and for A311 select 8297W only !!!1
g.Now on the right side browse the CPB file in ur system which u got on unzipping the stock ROM
h.Click Apply and the CPB file check will start ........it will take around 2-5 Min 
I .on completion u will again come on the home page ...
j.Now on the left top side of the application, u will see Start icon ......click on it
k.Now connect ur bricked device via USB cable without battery and in the power-off state
l.Now if everything went correct then the Cell 0 icon will change into downloading icon ......it means ur phone is detected
m.Flashing will automatically start and will take around 5min 
n. On completion, Cell 0 will become 100%
o. Unplug USB cable
p. REBOOT DEVICE!!!!!!

CONGRATS UR DEVICE WILL RISE FROM THE DEAD !!!!! ENJOY !!!!!!